answersLogoWhite

0

unbolt it from underneath the dash and pull it out.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you change the light bulb behind the heater controls in a 07 Buick Rendezvous?

To change the light bulb behind the heater controls in a 2007 Buick Rendezvous, first, disconnect the negative battery cable to ensure safety. Remove the trim panel around the heater controls by gently prying it off. Once the panel is removed, you can access the bulb sockets; twist and pull out the old bulb and replace it with a new one. Finally, reassemble the trim panel and reconnect the battery.


Why wont my wrangler heater change vents from defrost to panel?

Check that the linkage that controls the damper is connected and working. The linkage is just above the gas pedal.


How do you get to the bulb for lighting your heater controls?

To get to the bulb for lighting the heater controls, the front panel will have to be removed. Depending on the type of vehicle, the knobs might have to be popped off first. It is also possible on some vehicles to get to the lighting for the heater controls from under the dash.


How do you change back light bulbs in heater controls on peugeot 306?

To change the backlight bulbs in the heater controls of a Peugeot 306, first, remove the surrounding trim panel carefully to access the controls. Disconnect the control unit from the dashboard and locate the bulb holders on the back of the unit. Twist and remove the old bulbs, then replace them with new ones, ensuring they are properly seated. Reassemble the control unit and trim panel, and test the lights to confirm they work.


How do you change the heater control panel on a Mercedes c180?

To change the heater control panel on a Mercedes C180, remove the radio and the two screws under the CCU panel. Pry off panel and remove the bracket.


How do you change the heater control panel switch in a 2005 Camry?

You need to replace the entire panel with all controls Stealership price is about 600.00 plus install or you can go to Ebay and find it for under 100.00 like I did


How to change dash bulb on zafira heater control?

To change the dash bulb on a Zafira heater control, first, ensure the vehicle is turned off and disconnect the battery for safety. Remove the trim panel around the heater controls, then carefully detach the control unit from its housing. Locate the faulty bulb, replace it with a new one, and reassemble everything in reverse order. Finally, reconnect the battery and test the heater controls to ensure the new bulb is functioning.


How do you change the heater cables of a 1991 Toyota Corolla?

To change the heater cables on a 1991 Toyota Corolla, first, disconnect the battery and remove the dashboard panel to access the heater controls. Next, locate the heater cables connected to the control mechanism, and detach them by loosening any retaining clips or screws. Replace the old cables with new ones, ensuring they are properly routed and secured. Finally, reassemble the dashboard, reconnect the battery, and test the heater controls to ensure proper function.


How can I change the thermostat on my water heater?

To change the thermostat on your water heater, first turn off the power to the heater. Remove the access panel to locate the thermostat. Use a screwdriver to adjust the temperature setting to your desired level. Replace the access panel and restore power to the heater.


How do you remove 1986 Toyota hilux heater controls?

To remove the heater controls from a 1986 Toyota Hilux, start by disconnecting the battery to ensure safety. Next, carefully pry off the trim panel surrounding the heater controls using a flathead screwdriver or a trim removal tool. Once the panel is removed, unscrew the mounting screws holding the heater control unit in place, disconnect the wiring harness, and then gently pull the unit out. Make sure to take note of the connections for reinstallation.


How do you change out the lights on the heater controls on a 2007 jeep commander?

To change the lights on the heater controls of a 2007 Jeep Commander, first, remove the trim panel surrounding the climate control unit using a trim removal tool. Next, unscrew and gently pull out the climate control unit to access the bulb sockets. Replace the burned-out bulbs with new ones, ensuring they are properly seated. Finally, reassemble everything by reversing the removal steps, ensuring the trim panel is securely in place.


How do i change the heater controls under the dashboard on 1999 Hyundai excel?

To change the heater controls under the dashboard on a 1999 Hyundai Excel, first, disconnect the negative battery terminal to ensure safety. Remove the dashboard panel by unscrewing any screws and carefully prying it off. Once exposed, locate the heater control unit, disconnect the electrical connectors, and remove any screws holding it in place. Replace it with the new unit, reconnect everything, and reassemble the dashboard.