at the back corners of the rear/boot area behind the parcel boxes/or behind the fold down extra seats - depending what you've got there.....there is a small plastic panel fixed with a plastic covered "Phillips" type screw.....un-do screw...remove panel up and out.....the lampholders are then visible [if you twist your neck] or can be felt with fingers....1/4 twist anti- clockwise and pull to remove appropriate lampholder....withdraw unit....twist bulb anticlockwise to remove globe from holder....replace bulb with exact same size and type.....replace ment of all components by reversing the sequence......sometimes you may need to remove seats or boxes to make access easier - obtain correct type screwdriver/tool for those screws.
have a 1994 land rover discovery & dont have owners manual. where i can i get one?
184366572
I believe that there is no timing chain, but a belt instead, which can be accessed behind a metal cover opposite the radiator.
Where the hose runs into the Engine behind the Distributor
You find all of the wiring diagrams in the Land Rover Discover Haynes Service and Repair Manual (my edition is # 3016)
If you have to ask, take it to a garage.
what size thread is the oil switch sensor in a range rover 1994 4.2 v8
i dont think you can
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
It takes a very small Allen wrench in the holes located on the face of the radio (one on right and left). Loosen them and the metal retaining clips will be disengaged and you can then remove it.
well you change it from the outside
Change the bulb??