To change the thermostat on a 1988 Chevy Celebrity, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose connected to the thermostat housing. Unbolt the thermostat housing, replace the old thermostat with a new one (ensuring proper orientation), reattach the housing and hose, and refill the cooling system with coolant. Finally, reconnect the battery and start the engine to check for leaks and ensure proper operation.
To locate the thermostat on a Chevy Celebrity follow the upper radiator hose to the coolant outlet, which is mounted to the top of the thermostat housing.
what is the wiring diagram for an 1988 Chevy celebrity stero
The fuel filter on a 1988 Chevy celebrity 2.5 litre FI is located right in front of the rear passenger side tire.
The fuel filter in your 1988 Chevy Celebrity is on the driver's side behind the rear wheel next to the fuel tank.
The fuel pump on your 1988 Chevy Celebrity is in the fuel tank.
The 1988 Chevy Celebrity uses distributorless ignition. There is no provision to alter timing, the engine control module takes care of that.
Remove the water supply hose from your 1988 Chevy Cavalier thermostat housing. Remove the thermostat housing bolts. Lift the old thermostat out and drop in the new thermostat.
you need to drop the gas tank down and remove fuel pump from tank.
In the fuel tank
100 lb or above
The thermostat is under the water outlet on the top of the engine. The upper radiator hose attaches to the water outlet.
No easily, however, I suppose you could.