To change the thermostat in a Chrysler LHS, first ensure the engine is cool, then disconnect the negative battery cable. Drain the coolant from the radiator and remove the upper radiator hose connected to the thermostat housing. Unscrew the thermostat housing and replace the old thermostat with the new one, ensuring the rubber gasket is in place. Reassemble the housing, reconnect the hose, refill the coolant, and finally reconnect the battery cable.
Where is the thermostat located at on a 1999 lhs
The thermostat is under the housing where the lower radiator hose attaches to the engine.
It is under the housing where the upper radiator hose hooks to the engine.
It is under the housing where the lower radiator hose hooks to the engine.
It is located under the housing at the engine end of the lower radiator hose.
It is under the housing where the lower radiator hose attaches to the engine.
The spring goes into the engine block.
Chrysler LHS was created in 1994.
The coolant bleeder on the 3.5L is on the thermostat housing on top of the engine.
No.
To replace the thermostat in a Chrysler LHS, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose to access the thermostat housing. Unscrew the housing, take out the old thermostat, and clean the mating surfaces before installing the new thermostat with a new gasket. Finally, reassemble everything, refill the coolant, and check for leaks.
It is under the housing where the upper radiator hose hooks to the engine.