you will need a 32mm wrench a 10mm 11mm 13mm socket and a flat head screw driver. With the 32mm wrench, take the fan blade off by turning clock wise. Once fan is out of the way use the screw driver to remove the clips on the upper & lower rad. hoes. the thermostat is held on with 3 10mm bolts take them off and 1 13mm bolt. when you remove the 13mm bolt you will also need to loosing the 11mm nut that holds the engine pull bracket. install in rev. order
The primary cause for a 2000 BMW 528i to run hot is a defective thermostat. A stuck thermostat will prevent coolant from flowing and can lead to overheating.
do i need to change the manifold when replacing thermostat
where is thermostat in 2000 chrysler grand voyager ??
The thermostat on a BMW 525I is located into the water pomp in the thermostat housing.
is in hard to replace a thermostat on a 2001 bmw 325i
There are a few guidelines that will help you to change a thermostat in a 2000 Silverdo. Remove the clamp and detach the hose on the thermostat and then remove the bolts that hold the thermostat to the manifold and replace it with the new one and screw back the bolts and the clamp.?æ
try to reset oil light on 528i bmw year 2000
Please help me!!!!!
mercury sable
Go to the dealership or a BMW specialist.
Were is the thermonstat on a 1992 bmw 318 i
thermostat