To change the amplifier in a 2004 Chevy Avalanche, first disconnect the negative battery cable to ensure safety. Remove the trim panels and any screws or bolts securing the factory amplifier, typically located under the driver's seat or in the center console. Disconnect the wiring harness and speaker wires from the old amplifier, then install the new amplifier by reversing the process: connect the wiring, secure it in place, and reattach the trim panels. Finally, reconnect the battery and test the audio system to ensure everything is functioning properly.
Under the center console.
A 2007 Chevy Avalanche will only have an external factory amplifier if it is equipped with a Bose stereo system. If there is a factory amp included, it will be underneath the center console.
Under the hood driver side fuse box labeled Mil 15 amp fuse, just change it
The 145 Amp has more/larger ventilation openings.
Wrong amp of fuse
If you look at it real close. You will see it stamped into the alternator.
how many watts does he amp have in a 2005 chevy impala
I have a 10" sub and an amp in my 2004 Chevy silverado. My dad got it for me but he also had to by a different stereo. I don't know if just the chevy stereo wouldn't work with it or if it's all stock stereos.
You can find a wiring diagram for your 2004 3500 Chevy Express tail light amp most Chevrolet dealerships. Chevrolet service manuals will have the diagram and can be obtained from most local libraries.
i have a 97 Chevy Tahoe the amp. was above the gas accelerate mounted on a slant
15 amp fuse under hood, labeled in diagram as "CIGAR"
100 or 105 amp.