It is not necessary to remove the entire grill, just the chrome trim piece that extends across both head lights. Use a small flat screwdriver and delicately pry the trim piece towards you. It is held in place by several small plastic tabs that are located across the entire back side of the trim piece. Be VERY careful in doing this as the chrome piece is very brittle & easily broken or damaged. Once you have the trim removed, you will need to remove 3 bolts that retain the headlight assembly and one press-in tab. The bolts have 10mm heads. Two are located on the top of the assembly, one on the lower corner. After removing the 3 bolts, pull the headlight forward to dislodge the lower retaining tab which is on the opposite side of the headlight housing from the lower bolt toward the rear of the housing. Once you have the assembly out, accessing the bulb is simple!
This is not the easiest job to do, so it is a good idea to take painter's tape & protect the paint on the bumper & fender as well as the clear, Lexan part of the headlight assembly.
Take your time, be careful, & you will get it right the first time!
*******************ANOTHER OPTION****************************
For replacing the RF headlamp bulb without disaligning the lamp's output beam:
Open the hood and remove the air intake assembly to access the back of the headlight housing; from here, you may reach the "bulb" by untwisting the coupling that holds the bulb in place. Afterwards you may release the harness/socket through the press-in tab that secures the bulb. Total time needed: 30 minutes.............a single bulb runs about $9 at most auto parts stores.
How do you change the fog light on a 2005 Chevy Equinox?
2005 Chevrolet Equinox headlight bulb lamp replacement procedure: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
You will need to take the complete headlight assembly loose or out to get to the bulb to change it.
To change headlight bulbs in a 2005 Ford Escape, first make sure the light switch is in off position and replace the passenger light bulb. Next, get to the driver's side bulb, remove the battery by holding it down, to be able to change the headlight bulb.
To change a headlight bulb in a 2005 Nissan Murano, first, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the headlight by pressing the tab and pulling it off. Remove the bulb by turning it counterclockwise, then replace it with a new bulb, ensuring it is securely in place. Finally, reconnect the electrical connector and test the headlight to ensure it works properly.
getting the headlamp assembly to slide out to access the insert for the bulb is tricky
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
To change the headlight bulb on a 2005 Toyota Matrix, first, open the hood and locate the headlight assembly. Disconnect the power connector from the back of the bulb and remove the retaining clip or twist the bulb socket to free the old bulb. Insert the new bulb without touching the glass, reconnect the power connector, and ensure everything is secure before testing the headlight. Always consult your owner’s manual for specific instructions and safety precautions.
To change the headlight on a 2005 Hyundai XG350, first, open the hood and locate the headlight assembly. Disconnect the power connector from the back of the headlight bulb and remove the retaining clip or screw holding the bulb in place. Gently pull the old bulb out and replace it with a new one, making sure not to touch the glass part of the bulb. Finally, reattach the power connector and secure the assembly back in place.
See your user manual, its great for basic maintenance info
How to change headlight bulb 2011 ram 3500
To change one's back headlight, one must first uncover the light bulb. Then one must unscrew the bulb. One must have another bulb to change the headlight. Screw in the new bulb.