*** Caution ***Never open, service or drain the radiator or cooling system when hot; serious burns can occur from the steam and hot coolant. Also when draining engine coolant, keep in mind that cats and dogs are attracted to ethylene glycol antifreeze and could drink ant that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantities. Always drain coolant into a sealable container. Coolant should be reused unless it is contaminated or is several years old. Heater Core 1. Disconnect the battery ground cable 2. Drain and recycle the engine coolant. 3. Remove the instrumental panel. 4. If equipped with the 5.4L 4V engine, remove the junction block splash shield. 5. If equipped with the 5.4L 4V engine, remove the bolts and disconnect the cable ends from the starter relay. 6. If equipped with the 5.4L 4V engine, remove the junction block bracket. 7. Disconnect the heater core hose couplings. 8. Remove the retaining screw and remove the A/C plenum demister adapter. 9. Disconnect the vacuum line from the A/C plenum demister adapter. 10. Remove the heater core bracket. 11. Remove the 13 plenum chamber top retaining screws. 12. Remove the plenum chamber top. 13. Remove the blend door assembly from the case. 14. Remove the heater core. 15. The installation is the reverse of the removal.
To change the heater core in a 87 ford f150 is easy. Just remove the glove box and then behind it there is 7 bolts. After you remove the 7 bolts then just remove the cover and behind it is the heater core. By far the easiest heater core I ever changed.
heater core hoses not hot
change out the heater core
Instualation of a heater core on a 1999 Ford Explorer V6, how do you install the heater core.
Try flushing the coolant system out
what is the year model? 1995
How do i change the heater core on a 1997 ford e150
heater core is in back of the glove box
There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system.
you should be able to get at heater core just by removing glove box.no need to remove all the dash Is there any instructions on how to do this?
Your heater core might be clogged or otherwise inoperable. Videos for unclogging a heater core can be found quite easily on Youtube.
You probably have a leaking heater core.