Do you mean the electrical ignition switch or the cylinder lock and key..?
How do you change the antifreeze in a 2004 Eddie Baurer ford Expedition.
On a 2002 Ford Expedition : Turn your low beam headlights on and then pull the headlight switch out towards you to turn on the fog lights
pull the head light switch out bentley
To replace the ignition switch on a Ford Bronco II Eddie Bauer, first disconnect the battery to ensure safety. Remove the steering column cover by unscrewing the screws and gently prying it off. Locate the ignition switch, disconnect the wiring harness, and remove the mounting screws to take out the old switch. Install the new ignition switch, reconnect the wiring, and reassemble the steering column cover before reconnecting the battery.
In the right front passenger footwell , by the kick panel
Check your owners manual. If you don't have one copy & paste this link. http://www.genuineservice.com/genuineservice/en/gloveboxresults
The switch should be where your light are. You just pull out on the light switch but the fog lights will not come on unless all lights are on.
Unfortunately There is not a reset oil button ( Like the explorer) at least for the 2003 Expedition ( Eddie Bower model)
On a 1998 Ford Expedition : One way is : The 4.6 has the Electronic Distributorless Ignition System ( EDIS ) and has ( 2 ) coil packs and ( 8 ) SPARK PLUG WIRES The 5.4 has the Coil On Plug ( C.O.P. ) ignition system and has ( 8 ) individual coils
There are ( 8 ) spark plugs with ( 8 ) individual coils with your Coil On Plug ( C.O.P. ) ignition system on a 2004 Ford Expedition with either the 4.6 or 5.4 liter V8 engines
its a plastic circle right next the fuel injectors theres 8
If it has air suspension there will be a shut off switch for the air suspension The switch is located behind ( 2 ) access panels that are in the cargo area , on the driver's side , by the liftgate