The oil pump is located inside the oil pan.
You have to drop the oil pan to replace the oil pump.
I think you open it up and change it. Like it is so obver.
ITS ON TOP OF THE PUMP.
There is an access door in the trunk for the fuel pump. You can change it from there.
the oil pump is the housing behind the bottom crank,you need to remove the cambelt and then the bottom crank and its the casing behind it.
How to change. Fuel pump on 200 crown vic
If you meant vectra you have to remove front bumper and plastic inner wheel arch then disconnect terminal from pump then unbolt
how to change oil pump in a 2000 Chevy silverado 4.3 2 wheel drive truck
The water pump on a Vectra 2.0 DTL is located just behind and to the right of the crankshaft pulley. This is on the front of the motor. One easy way to find a water pump is to trace where the hoses go from the radiator.
the fuel pump tank wiring is faulty at the pump
To change the ABS pump on a 1998 Vauxhall Vectra 1.8 hatchback, first, disconnect the car battery to ensure safety. Remove the plastic cover and locate the ABS pump, which is typically mounted near the brake master cylinder. Disconnect the electrical connectors and brake lines from the pump, then unbolt it from its mount and replace it with the new unit. Reattach everything in reverse order, ensuring that you properly bleed the brake system afterward to remove any air.
You can change the water pump on your 2000 Mercedes E3 20 by first removing the water pump belt. Next remove the water lines. Remove the bolts that hold the water pump in place. The water pump will pull outward and can be removed. Reverse the process to install the new water pump.
On Vectra C 04 model, the steering pump is located inside the rear wheel arch, quite an easy job to do really however the pump if new will cost you around £450, after fitted the car must be taken to vauxhall dealers to have the steering calibrated and only this can be done with tech 2 software,only then will the stering wheel light go out on the display.