To change the rear axle seals on a 2000 GMC 3500, first, lift the vehicle and remove the rear wheels. Next, remove the brake assembly and the axle retaining bolts to pull out the axle shafts. After that, use a seal puller to remove the old seals from the axle housing, clean the area, and then install the new seals, ensuring they are seated properly. Finally, reassemble the axle shafts, brake assembly, and wheels, and lower the vehicle.
You have to remove the brakes, rotors, wheel hubs, axle shafts, diff cover, and differential carrier, seals are on the inside of the axle tubes.
very carefully
When you see rear differential fluid on your rear brakes & assembly.
if you mean lose the oil, it means you have a laky seal either in the differential or the axle seals
The 2005 Dodge Ram 3500 axle ratio is 3.73:1
howdo you change the front axel of a dodge Dakota 2000 4x4
A 1994 Ram 1500 has a Dana44 front axle. A 2500/3500 has a Dana60 front axle.
Axle seals
3500
I have a 1951 John Deere A that is seeping oil out of the one axle out close to the wheel. Do I need to remove the the rearend and the big bull gears and get to them from the inside? Paul Lehman
That depends on what seals are leaking. The inner front axle seals will cost you over 6 hours of labor plus seals and fluid.So if your local labor rates are $100 an hour that will be over $600That depends on what seals are leaking. The inner front axle seals will cost you over 6 hours of labor plus seals and fluid.So if your local labor rates are $100 an hour that will be over $600
YesYes