First check for the location of the spark plugs. Make sure to use a spark plug socket when you do. It is different form a normal socket. It has a rubber protector inside the socket to protect against breaking the plug. GM cars. some of them you have to take the wheel off to get to the spark plug. I don't know what ----. figured that little gem out. They should be shoot. Make sure to get the right plugs to replace them. Check the plug gap for the correct amount. Don't believe in the thought that they are set from the factory. Check it yourself to make sure. Before replace the spark plug wires make sure to clean the inside of the contacts at the end of the wire. hope it helps, duboff
i have a probleme whit my 1996 grand am i cant change the plug cause there a bar on front of it
my van will crank, but won't start, had spark plugs change
There is an article with video on how to change spark plugs at ; http://www.carbasics.co.uk Look in their 'how to' section.
Change the Spark plugs, if not bin it
remove the spark plug wires one at a time and unscrew the plugs
Remove the spark plugs wire and remove the plugs wit a spaerk plug wrench or socket.
Spark plugs are easy to change. One disconnects the batter and spark plug cables, and removes the old spark plugs. Next a person puts in the new spark plugs, then reconnects spark plug cables and the battery.
Where are the spark plugs on a 1996 Nissan maxima?"
platinum plugs 75,000 miles. resistor plugs 30,000.
How can I change the wiring and spark plugs on my 1996 Cadillac Sedan Deville Concours?
With a spark plug socket and socket wrenches and extensions.
Disconnect the battery, remove the spark plug cables and boots, and remove the old spark plugs. Next, put in the new spark plugs, replace the cables and boots, and reconnect the battery.