the blend door is operated by vacuum lines located under dash if you press a different vent output and nothing happens check for a vacuum leak located under dash behind glove box
the way to trouble shoot the blend door is if it stays in hot or ac mode means bad Blend door
how d you remove the blender door motor on a 2007 impala
Hello, I am helping a friend of mine with an A/C problem and while searching the internet for help for him. I ran across alot of people complaining about a blender door problem which might help you. Here is the link to a website that displays how to resolve a blender door problem. It may prove worth you while to check it out. http://www.blenddoorfix.netfirms.com/ Jeff
If your a/c or heat is acting up. Then is the blender door problem. Blend Door Problem Check related link below for more info.
Check the PSI level on your A/C first. If it is low add refrigerant. If not it could be the blender door is not opening or closing correctly.
A bamax blender is also known as a hand mixer. If you like the convenienve of having a hand blender you should change it. If you do not like the idea of a hand blender, then you should stick to your old blender!
its when you take a door smash it up with your wiener, take another one, do the same, and put them in a blender.
You have to pull the glove box door down. there are two catches one on each side of the of the door. the filter(s) are behind the door, visable and very easy to replace.
by change the speed of blender
You will either have a vacuum leak, a bad controller head or a bad door actuator.......
Yes, AC motors generate their own magnetic field.
On my Son's 98 expedition we found that the A/C was staying engaged all the time we disengaged the A/C clutch and now we have plenty of heat.