Take it to a specialist, I've looked on here and nobody knows!
Nope, pins are different.
Depends on the engine. A variety of different petrol engines and a diesel option were fitted to the Fiesta Mk6. All have different filters.
it is behind the lights, accessed from inside the boot, behind the side covers.
the mk6 fiesta 1.25 has 75bhp.
Mk6 1.4 Duratec SE 16v 02> gap should be 1.3mm.
if its a mk6 then they usually have a stretch belt as there is no adjuster. i spent £50 on the 3 set belts and they are stretch. still the same.
2
in the door panel and in the the rear side panels. hope this helps
To change the front side light bulb on a Ford Fiesta MK6, first, open the hood and locate the headlight assembly. Remove the protective cover or cap at the back of the headlight to access the bulb. Disconnect the wiring harness from the bulb, then twist the bulb socket counterclockwise to release it. Replace the old bulb with a new one, reconnect the wiring, and secure the cover back in place.
To change the rear speakers in a Ford Fiesta MK6, start by removing the rear door trim panels. Use a trim removal tool to gently pry off the clips and screws holding the panel in place. Once the panel is removed, disconnect the old speaker by unscrewing it and unplugging the wiring harness, then replace it with the new speaker. Finally, reattach the door trim panel securely.
5" X 7", & aparently 20 watts each
Yes,the mk4 and 5 chassis' are identical and generally any fiesta front wheel drivetrain can be transplanted into any other fiesta engine bay up to mk6.