Loosen the component slide it towards the engine to lossen the belt, remove belt. Install in reverse.
If the fan is your problem it is held on with 4 small bolts, remove them and the fan.
P/S you should be able to work the belt around the fan blades without removing the fan.
On_mitch
To change the fan belt on a 2003 Geo Tracker, first, disconnect the negative battery terminal for safety. Then, locate the belt tensioner and use a wrench to relieve tension on the belt. Remove the old belt from the pulleys and install the new belt, ensuring it follows the correct routing. Finally, release the tensioner to tighten the belt and reconnect the battery terminal.
This might be helpfful. How do you Change a fan belt on 94 prizm?
what is the timing specs for a 95 geo tracker
http://www.kick-fix.com/t-belt/tbelt.html
The schematic should be on the fan shroud. If not find a like car and draw a schematic. If the belt came off by itself, there may be something out of line and you may have to take it to a garage.
93 tracker
This was for a 1994 but try searching here. How do you Change a fan belt on 94 prizm?
hjfdjdfjgjdf
To change the voltage regulator on a 94 Geo Tracker, locate it in the black plastic box on the back of the alternator. Unplug each cable from the regulator, remove it and replace.
i have 1995 4x4 geo tracker with a bad auto transmission will a auto transmission out 1998 4x4 geo tracker fit in 1995
does 1990 geo tracker have air bags
How do you add refridgerant to a 1997 Geo Tracker?