howdo you change the front axel of a dodge Dakota 2000 4x4
Remove the shield on the front lower side of the bell housing.
The oil filter housing is located on the front of the engine cases. It has a single bolt that attaches the housing to the engine. The housing itself is finned for cooling.
1992 dodge dakotas do not have front coil springs, they have torsion bars instead.
Front or rear? Just change the bulb or change the lens housing?
Subaru Forester does not have cornering lights, so chances are you are asking about the front parking light. The housing is held on by one screw accessible under the hood. You then pull the housing toward the front of the car. Bottom of that housing has a ball stud that fits in a socket on a small ear on the headlamp housing. This will allow you to either change the bulb or change the entire housing. --Ken
how to change front turn single bulb on a 2006 buik terriza
That would be the large, bell-shaped housing at the front of the transmission where it meets the engine block. From the top, looking down with the hood up, it would be directly below the firewall.
Under the housing of the front indicator you will find a single screw, loosen this several turns until the mirror can be fairly easily withdrawn from the housing, you can now access the indicator, the rear one is a simple matter of removing the cover from the rear of the lens.
should take about 2 hours if you are mechanically inclined
It comes out the back of the light housing.
The thermostat housing is located behind the alternator on the front of the engine just follow the hose from the top of your radiator and that will lead you to the thermostat.