Your Mechanic should do this complicated Job. But if you want to DIY it then start [http://www.themotorbookstore.com/malibu.html Here] Hope This Helps.
what tools do i use to change the front brakes in my 2003 Pontiac grand prix
with tools
This is a major repair requiring the removal of the intake and exhaust manifold, and then the removal of the heads. Not a DIY repair unless you have the knowledge, and tools necessary to accomplish this repair. If you want to tackle this job, I suggest you buy yourself a repair manual for your Pontiac.
it should only take you a few hours with the right tools and parts and use your repair manual :D In order to do the job correctly, you have to remove the head, have it INSPECTED for faults (crack, pin holes, straightness). If it is a V6 or V8 BOTH Head gaskets should be changed at the same time. It's a long weekend project.
you need lots of tools to do that then take it out carefully
Normal metric mechanics tools. No special tools are needed other than what any mechanic would own.
with tools
by tools
Visegrips, a cigarette and beer.
To change the pressure hose on a Pontiac Grand Am, first, ensure the vehicle is safely elevated and supported. Disconnect the negative battery terminal, then locate the pressure hose connected to the power steering pump and the steering gear. Use appropriate tools to loosen and remove the old hose, then install the new hose by tightening it securely. Finally, reconnect the battery, refill the power steering fluid, and check for leaks.
what tools do i need to remove the wheel cylinder on a 1993 pontiac bonneville
Find it in the fuel line under the ccar. A set of special tools are required to change it but they are cheap at the parts store. To the best of my knowledge there are no special tools required. It is located under the drivers side floor acessable from under the vehicle. For pics and instructions check out http://www.pfyc.com/supportfiles/gasfilter/ . "G"