0
***CAUTION***The halogen bulb contains gas under pressure. The bulb may shatter if the gas envelope is scratched or if the bulb is dropped. Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. è The headlamp bulb should not be removed from the headlamp until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamps with the bulb removed from the headlamp. Headlights Removal & Installation 1. Raise and support the hood. 2. Raise the headlamp retainers by pushing rearward and pulling up. 3. If equipped, rotate the headlamp bulb protective counterclockwise and remove. 4. Disconnect the headlamp bulb electrical connector. 5. Remove the headlamp assembly. 6. Rotate headlamp bulb retainer counterclockwise and remove. 7. Remove the headlamp bulb by pulling it straight out with a gentle up-and-down rocking motion. ***WARNING*** Do not touch the glass bulb with your fingers. Oil from your fingers can severely shorten the life of the bulb. If necessary, wipe off any dirt or oil from the bulb with rubbing alcohol before completing installation. To Install; 8. Install a new bulb into the headlamp assembly. 9. Install the headlamp bulb retainer and turn it clockwise to engage the retaining tabs. 10. Attach the bulb electrical connector. 11. If equipped, install the headlamp bulb protective cover. 12. Install the headlamp assembly. è Be sure the headlamp assembly is positioned correctly with the alignment pins inserted into the proper holes and onto the ribs of the reinforcement. 13. Engage the retainers by gently pushing down. 14. Turn the lights on and check the bulb operation.
What else can I help you with?
How do you change a 2004 Nissan altima headlight bulb?
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
What kind of headlight bulb use the for expedition 2004?
According to the 2004 Ford Expedition Owner Guide : Low beam headlights take ( # 9006 bulb ) High beam headlights take ( # 9005 bulb )
How do you replace the headlight bulk on a 2004 Hyundai 2004 XG350L?
How do you change a headlight bulb on 1 2004 Hyundai XG 350?
Change headlight bulb ranger?
what is the bulb Walt for my 2004 ford ranger xlt 4.0
How do you replace headlight bulb on 2004 Mazda Tribute?
How do you replace headlight bulb on 2004 Mazda Tribute?
How to Change a headlight bulb on a 2004 Mazda 6?
Suggest dealership do it. On an m6 you'll have to drop the bumper deending on which headlight you need to change.
How do you change the low beam bulb on your 2004 Hyundai XG350?
In a lot of newer cars, you pop the hood and twist off the bulb-holder from behind the headlight. Then, you remove the old bulb, insert the new bulb, and twist the bulb-holder back into the headlight. In some cars, you have to replace the whole headlight.
How do you change the low beam bulb on the 2004 Mercedes e320?
To change the low beam bulb on a 2004 Mercedes E320, first, open the hood and locate the headlight assembly. Remove the plastic cover or access panel on the back of the headlight to expose the bulb. Disconnect the electrical connector from the bulb, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, ensuring not to touch the glass with your fingers, and reassemble the headlight by reversing the steps.
How do you change a headlight bulb on a 2004 BMW 330Ci?
Bust the blowed one and stick the new one in
How do you change headlight bulb 2011 3500 ram truck?
How to change headlight bulb 2011 ram 3500
How do you change the back headlight?
To change one's back headlight, one must first uncover the light bulb. Then one must unscrew the bulb. One must have another bulb to change the headlight. Screw in the new bulb.
How do you change a low beam headlight bulb on a 2004 jaquar xj8?
To change a low beam headlight bulb on a 2004 Jaguar XJ8, first, open the hood and locate the back of the headlight assembly. Disconnect the power connector from the bulb by gently pulling it off. Remove the old bulb by turning it counterclockwise and then insert the new bulb, ensuring it's securely in place. Finally, reconnect the power connector and test the new bulb before closing the hood.
