Unbolt it at the hinges.
To change the headlight assembly on a 2006 Ford Fusion, first, open the hood and locate the headlight assembly. Remove the retaining screws and any clips securing the assembly, then gently pull it out. Disconnect the wiring harness and replace the assembly with a new one by reversing the process: connect the wiring, secure it with screws and clips, and close the hood. Always test the new headlight to ensure it functions properly.
.
The block heater cord on a 2012 Ford Fusion is located directly behind the upper edge of the grill. You have to lift the hood to plug in. This is a peeve of mine as I don't particularly like having to lift the hood to plug in at -40 when the hood is frozen shut!
On the driver's side of the car, there will be a handle with a small picture of the car. The picture has the car and the hood is open. You pull that handle. You will see that the hood of the car pops up. Next, you search for a "latch" around the middle of the hood. You press up on that handle and hold it there while lifting the hood. The hood will go right up and there is your engine compartment!
The emissions information label under the hood will say if federal, California, etc.
under the hood in the usual place
The cowl is located under the bottom of your windshield and under the hood where your windshield wipers are.
The main fuses are under the hood, by the firewall, in front of the driver's position.
The cast of The Sea Change - 2006 includes: Domiziano Arcangeli as The Wolf Amanda Ward as Little Red Riding Hood
It's on the driver's side, under the hood - check the owner's manual for a diagram.
look under the hood behind the light,There is a clip that holds the bulb in
Just change the fluid, it should be right next to the oil dipstick under the hood