It depends what year and model you have. Most civic just have a screw that holds the lens on. Once you unsrew it the bulb can be pulled out and replaced.
License plate light covers for a 1999 Honda Civic can be found at any auto parts store. If the stores do not carry the product, they can order it for the customer.
To change the license plate light bulb on a 2004 Honda Civic, first, open the trunk and locate the license plate light assembly. Use a flathead screwdriver to gently pry off the lens cover. Remove the old bulb by twisting it counterclockwise, then insert the new bulb by twisting it clockwise until secure. Finally, snap the lens cover back into place and ensure the light works by turning on your vehicle.
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.
how do you change the light bulb over the license plate on 2000 eclipse
how do you change the rear license plate light on a 1999 Buick Regal
show please how change plate light on an 2007 nissan sentra
If your license plate light is out change the bulb in it, if you have taillights your fuse is good as the license plate light uses the same fuse as the taillights.
on the 2001 XZ3 I removed the license plate and used a flat head screw driver to slid the license plate light cover over and they "pop" out.
license plate light just pops out of the bumper with a screw driver.u can buy a new light at auto store or just change the light bulb
how to change 2005 equinox license plate light i removed the screws but it didn't release
How do I change the license plate bulb on a 1993 Lexus ES 300
To replace the license plate light assembly on a 2009 Honda Civic, first, open the trunk and locate the license plate light assembly. Use a flathead screwdriver to gently pry off the cover or lens. Remove the old bulb by twisting it counterclockwise, then insert the new bulb and reassemble the cover. Finally, test the new light to ensure it works properly.