there are 2 screws hidden under where your ash tray is. remove the ashtray and you will see them underneath. after removing, the rest is just snapped on. Give a couple good pulls starting from bottom to top and it will expose your lighter. Unsnap your power from the backside, and unscrew the nut on the backside of the socket as well
Check power to socket If none check fuses If power replace lighter element
In Canada go to CTC and buy a generic cigar/cigarette lighter and plug it in the proper hole in the dash:-) .But I bet you meant lighter socket? If so answer is totally different.To prevent person's from disposining of vehicles via fire insurance that socket for the lighter is protected by a fuseable link which is built into the wire feeding the socket.Check it first.Borrow a lighter from someone else's car to make sure socket is dead not just element in lighter.
How do you add refridgerant to a 1997 Geo Tracker?
Most cigarette lighter assemblys are in two parts, first you would insert into dash, and from the back side screw on the back from under the dash. are we talking about the actual lighter that has the heat element, or are we talking about the socket adapter. I have posted for socket, if this is just the lighter itself, these usually screw together also, most of the time it is just easier to replace the lighter at your local auto parts store, or go to your local salvage yard.
The 1997 Geo Tracker uses Beck Arnley 252-1501C Blue 50/50 Premix coolant. The Geo Tracker has a coolant capacity of 5.5 quarts.
its in the tank
How cha~ge oil tra~smisio~ of a geo tracker 95
10 mill long socket
Use a 02 socket. The 2 sensor are located in front and behind the cat.
To change the oil on a 1997 Chrysler Voyager, you typically need a 13mm socket to remove the oil drain plug. Additionally, having a socket wrench and an oil filter wrench handy will make the process easier. Always ensure the vehicle is securely lifted and supported before starting the oil change.
GEO Tracker
No