answersLogoWhite

0

Simply turn each lug nut counter-clockwise with a standard lug wrench until it comes off the threaded stem. My 1991 truck has a plastic axle cover that must first be removed before you begin loosening the lugs.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

Where is the screw holding on the rear brake drum of a 1991 Isuzu pickup?

on the outboard side near the lugs.


How do you change the lugs on a 1999 Toyota Avalon?

go to discount tire


What are the measurements between the lugs on a 93 Toyota PU 4x4 6 lug wheel?

The measurements between the lugs on a 1993 Toyota Pickup 4x4 with a 6-lug wheel typically have a bolt pattern of 6x139.7 mm (also referred to as 6x5.5 inches). This means that the distance between the centers of two opposite lugs is 139.7 mm. Additionally, the lugs are usually spaced evenly in a circular pattern, with an offset that varies depending on the specific wheel design.


How many lugs does a Toyota Camry have?

5


How do you change 5 lugs to 6 lugs on Chevy trucks?

You have to change axle and hubs


Are there 6 lugs on one wheel 1996 Nissan pickup truck?

yes


Are there 6 lugs bolts per tire 1996 Nissan pickup truck?

yes


How many wheel bolts are on a 2000 Toyota corolla?

4 lugs


How do you change a tire on a 2002 Kia Spectra?

Take out the jack, loosen the lugs, lift the jack under the frame of the car, change tire, hand tighten lugs, lower jack and finished tightening the lugs with socket wrench. Do not over tighten.


What are 1991 Oldsmobile Cutlass Cierra Wheel Lugs Torque specs?

100 foot pounds


What is lugs earthing?

it is also same as earthing lugs,there is no differenence earthing lugs ang lugs earthings.


How do you change a tire on a 2009 Toyota Sienna?

Break lugs loose with lug wrench, jack up car by frame or a arm, remove lugs& put new tire on. Spin on lugs hand tight. Lower wheel just enough to keep from spinning, but not all the way. This will allow slight wheel movement inwards to fully seat. Torque lugs to spec. with torque wrench. You may be able to find your specs online or search similar car. If 7/16 studs, go to 80#. Drop car & double check pressure new tire.