answersLogoWhite

0

You will first have to remove the the cover that cover's your valve cover. This can be done by removing the two hex screws that hold this cover on. Be sure to remove the hose that runs along the back side of this cover before pulling it out. Once you have pulled it off, you will notice the spark plug wires going down on top of the engine. Simply remove the wire, and then the spark plug one at a time. When you get the new spark plug ready, be sure to gap the plug prior to install. The owners manual will state the gap (or a range the gap has to be between). Then, spread some anti seize around the threads before you put the spark plug into the engine. Put it in, tighten it down until it is wrench tight, and then put the spark plug wire back on. Repeat this step until you are all done. Replace the cover in the reverse order as described above.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How many spark plugs in a 2007 Chevy Aveo ls?

4


When should you chang spark plugs on 2010 Chevy aveo?

For a 2010 Chevy Aveo, it's generally recommended to change the spark plugs every 60,000 to 100,000 miles, depending on driving conditions and maintenance habits. If you notice symptoms like rough idling, decreased fuel efficiency, or difficulty starting, it may be wise to check and replace the spark plugs sooner. Always refer to the owner's manual for specific recommendations based on your vehicle's needs.


Do you use a tool to remove or install spark plugs from Chevy aveo?

Yes, to remove or install spark plugs from a Chevy Aveo, it’s best to use a spark plug socket, which is specifically designed to grip the spark plug securely. A ratchet and extension can also be helpful for reaching the plugs, especially in tighter spaces. Additionally, a torque wrench is recommended to ensure the spark plugs are tightened to the manufacturer’s specifications. Always consult the vehicle’s manual for specific instructions and torque settings.


Chevy aveo throttle stumbles under acceleration?

More than likely it needs spark plugs and new ignition wires.


Location of Chevy Aveo spark plugs?

If you are not able to located the spark plugs on a car, you need not be working on it. If you can't use the correct grammar, you shouldn't be using a computer... The spark plugs are under the black plastic cover on the top of the engine. The cover is held on by 4 Allen screws.


How do you change oxygen sensor on a 2006 Chevy aveo?

How do you change oxygen sensor on a 2006 Chevy aveo?"


What is the spark plug gap for a 2004 Chevy aveo?

.044 in


What is the spark plug gap for a 2006 Chevy aveo?

0.030


What is the spark plug gap for a 2007 Chevy aveo?

0.044


How do you get the wires off the spark plugs on your Chevy aveo 2007?

Remove the plastic cover on top of the engine by removing the 4 srews with an Allen key, you will them see the 4 spark plug cables going from Right to Left and down to the spark plugs. Grab the rubber thing the wire goes through, they will require a good yank, do not pull on the wires themselves. The plugs are at the bottom of the hole you just created.


What is the firing order for a 2009 Chevy Aveo?

The firing order for a 2009 Chevy Aveo with a 1.6L engine is 1-3-4-2. This means that the spark plugs fire in the sequence of cylinder 1, followed by cylinder 3, then cylinder 4, and finally cylinder 2. This order is essential for the proper operation of the engine and its performance.


How to replace rear wheel bearings Chevy aveo?

How do you change the wheel bearings on a Chevrolet aveo 2005