check wiring harness also check for any possable leakage
2002 what?
It is more like a housing. Open the rear lift gate and look for the mounting screws on the side. www.trailvoy.com All the answers for your Trailblazer!
try under rear seat
Relatively easy job. Remove rear plastic panel on the inside cargo area. this will expose the nuts and bolts etc. www.trailvoy.com - All the answers for your Trailblazer from true enthusiasts!
I need a answer to my question. Thanks
tail light fuse 2002 monti Carlo
To change your Durango's tail light, first make sure to have a flat head screw driver and a new bulb. You will then open your trunk and remove the screws to the tail light, swap out the bulbs and replace the housing case.
To change the tail light on a 2002 Isuzu Axiom, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips securing the assembly and gently pull it away from the vehicle. Disconnect the wiring harness and replace the burnt-out bulb by twisting it counterclockwise. Reassemble the tail light by reconnecting the wiring, securing the assembly, and testing the new bulb.
You can change the tail light for a 95 to 02 by changing the trunk LID by changing the lid it allows the light to fit.
If you can't get to the back of the light through the trunk, you have to remove the light to change the bulb from the rear.
open the hatch there are two screws remove them and the tail light will come out, after that there are three more screws remove them and you can get to the bulbs to replace them
To change the tail light on a 2002 Ford Excursion, first, open the rear hatch and locate the tail light assembly. Remove the screws or bolts securing the assembly, then gently pull it out from the vehicle. Disconnect the wiring harness from the assembly, replace the burnt-out bulb by twisting it counterclockwise, and then install the new bulb. Reconnect the wiring harness, reattach the tail light assembly, and secure it with the screws or bolts.