Fron or rear?
You have to get a new hub with the bearing in it already.
most likely you will have to replace the hub bearing assembly autozone for about $80
are you trying to change the entire headlight assembly? or just the bulb.
Did you ever find out how to change the headlight assembly? If so, please let me know how to do it :)
how do you find out if wheel bearing is bad on a 2001 grand am gt
Need to change the whole bearing...
http://www.paulstravelpictures.com/GM-Wheel-Bearing-Hub-Assembly-Replacement/index.html
I replaced a front wheel bearing on a 1998 GP for about $500 at a dealership. That was about 5 years ago. It's a big job to do yourself, even with air tools. The bearing is an assembly that is replaced as a unit.
where are the oxygen sensors on a 2000 Pontiac grand am and how do you change them?
Check out the following write-up performed on a '98. It should be similar if not the same. http://www.oqcgp.net/phpbb3/viewtopic.php?f=44&t=37943 Hope this helps. "G"
The size of the nut that holds the front wheel bearing assembly on a 1997 Pontiac Grand Prix is typically a 30mm. It is important to use the correct size socket to avoid rounding the nut during removal or installation. Always refer to the vehicle's service manual for the most accurate specifications.
See posting for "How do you change the headlamp bulb in a 2003 Grand Prix?" All these model years are similar in production for the headlamp assembly.