0
Its pretty easy. Just loosen the serpentine belt. Take the lower hose off the radiator to drain the block. Take out all the bolts holding the pump on.There are three different types of bolts used used so remember where they go. Clean all the surfaces on the block , I use a Razor blade then some carb cleaner to remove any oil. Use a little silicone gasket sealer on the new gasket . Install in reverse of above, your done.
What else can I help you with?
How do you remove a water pump on a 1990 4.5 liter Cadillac?
how do I remove a water pump on a 1990 4.5 liter cadillac engine
How do you you change a water pump on a 1993 cadillac deville?
see answer given on how to change water pump on 92 deville. Same car.
How do you change the water pump belt to cadillac deville 98?
How to replace the belt
Where is the water pump on a 3 liter V-6 1998 Dodge caravan?
behind the timing cover you should change the timing belt when you change water pump.
How do you replace the water pump on a 1987 Cadillac Seville?
How do you replace the water pump on a 1988 Cadillac Seville?
How do you replace water pump on Cadillac CTS?
how do you replace the water pump on Cadillac cts 2004 3.6
How do you change a water pump 2004 5.4 liter GM pickup?
GM does not have a 5.4 liter it's most likely the 5.3 liter.
How do you replace the water pump on a 1991 Dodge Shadow with 2.2L Turbo?
how do i change a water pump in a 1991 dodge shadow with a 2.2 liter does it require an internal water pump
Where can you get a diagram to change a water pump on a 1990 Cadillac DeVille?
Get manual from the parts store or from AUTOBOOKSONLINE.COM
How do you replace fuel pump Cadillac Fleetwood?
How to change fuel pump in 1985 cadillac fleetwood
How do you replace water pump on Cadillac CTS 2003?
how do you replace the water pump on cadillac cts 2004 3.6
How do you change water pump on85 Cadillac Seville?
To change the water pump on an 1985 Cadillac Seville, first disconnect the battery and drain the coolant. Remove the serpentine belt, followed by the water pump pulley and any associated components obstructing access. Unscrew the water pump bolts, remove the old pump, clean the gasket surface, and install the new water pump with a new gasket. Finally, reassemble everything, refill the coolant, and reconnect the battery.
