With a scan tool.
With a scan tool.
To change the temperature sensor in a 2001 Oldsmobile Silhouette, first, ensure the engine is cool and disconnect the negative battery cable. Locate the coolant temperature sensor, typically found near the thermostat housing or on the engine block, and unplug the electrical connector. Use a socket or wrench to remove the old sensor, replace it with the new one, and reconnect the electrical connector. Finally, reconnect the battery cable and check for any leaks or error codes after starting the engine.
With a scan tool.
With a scan tool
If usb is in, check devices in your comp for error codes.
Pretty simple connect an obd2 scanner and it will pull the error codes for the check engine light then look up the error code and diagnose and fix your problem
Go to an auto parts store and ask them to run a scan. It's free and they check the codes with a special scan tool
With a scan tool.With a scan tool.
If you're having problems with your cruise control, I would suggest that you check into your Subaru's transmission and engine error codes to see what it's returning if anything. Many times the problem with the cruise can be diagnosed by the vehicle itself. The car will not allow the cruise control to function if it knows about a specific problem, which will be given in the error codes. I don't know what year subaru you have, but look into getting both the engine (check engine light) error codes and the transmission (power light) error codes on your Legacy to see what they're returning. My speed sensor was out on my Subaru. Once I found the problem in the error codes, I swapped it out and my cruise worked just great.
Go to www.banzai-racing.com , it will tell you how to get the error codes and what they are.
55 code is not an error code, it signals end of codes. If no other codes preceded it, you have no error codes.