Turn the ignition on/off 5 times i.e. on-off-on-off-on within 5 seconds then count the number of times the check engine light flashes. You'll find the associated engine problem at this site: http://www.dirtroad.com/codes.htm Good luck!
A car owner should know the location of the diagnostic port in their car. The diagnostic port in a 1994 Wrangler would be in the engine compartment, near the firewall.
have towed to a mechanic for a diagnostic
Have vehicle scanned to determine the problem
Usually a problem with the emission control system - have vehicle scanned to determine the problem
P1281 means the engine coolant temperature remains below normal during operation. Could be the thermostat.
have an engine diagnostic check at an auto shop to find out what the problem may be.
Yes, the engine will pull right out without removing the trans.
Code 22 for a 1994 Jeep Wrangler indicates a problem with the vehicle's coolant temperature sensor. This code is part of the on-board diagnostic system and signals that the engine control module (ECM) is not receiving a proper signal from the sensor, which can affect engine performance and fuel efficiency. It is important to diagnose and address this issue, as it may lead to overheating or other engine-related problems. Checking the sensor's wiring and replacing the sensor if necessary can help resolve the code.
The 2011 Jeep Wrangler has a V6 engine.
The 2013 Jeep Wrangler has a V6 engine.
The 2007 Jeep Wrangler has a V6 engine.
The 2014 Jeep Wrangler has a V6 engine.