0
What else can I help you with?
How do you clear a check engine light on a 2003 Astro?
To clear the check engine light on a 2003 Astro, you can use an OBD-II scanner to read and clear any stored trouble codes. Simply connect the scanner to the vehicle's diagnostic port, turn on the ignition, and follow the prompts to clear the codes. Alternatively, you can disconnect the vehicle's battery for about 15 minutes to reset the system, but this may also reset other settings. However, it’s advisable to identify and fix the underlying issue to prevent the light from coming back on.
Why check engine lights flash on 1997 Chevy astro van?
A flashing check engine light is an indication of a misfire.
How do you turn off the check engine light on a Chevy Astro Van?
You will need to have the engine scanned by a repair shop. That will give them codes to repair it. Once repaired they will clear the light. Clearing the light does not repair the problem. ***See discussion area for my dispute of this above answer****
How do you clear check engine light in a Kia Sorento?
Trying to clear the check engine light in a Kia Sorento yourself is not recommended. The check engine light could indicate a serious problem and the car should be inspected by someone qualified.
How do you reset service engine soon on a Chevrolet astro 1992?
To reset the "Service Engine Soon" light on a 1992 Chevrolet Astro, you can disconnect the battery for about 15 minutes. This will clear the engine codes and reset the light. Alternatively, you can use an OBD-I scanner (if available) to clear the codes. After resetting, ensure that any underlying issues are addressed to prevent the light from coming back on.
Check gauges light on Chevrolet astro van stays on?
gage of temperature go to hot position but is not hot the engine check gages light come on
Turn off check engine light on 2000 Chevy Prizm?
I clear the check engine light with a Scangauge II. But most ODB-II devices can read and clear the code.
How do you re-set the check engine light on a 2007.5 Dodge 6.7 Cummins Diesel engine?
A scan tool is required to clear the check engine light. If the failure is not repaired, the light will return.
Were is the check engine light fuse on a 2007 dodge caliber?
There isn't a single fuse for the check engine light. See related questions for explanations of why the light comes on and how to clear it.
Check engine light stays on Nissan Pulsar n16 how to clear codes?
If the check engine light stays on for the Nissan Pulsar n16, you would need to check the engine in order to clear codes. You can take the car for service and the problem will be diagnosed and restored to normalcy.
Can you just clear check engine light go to NJ inspection and pass?
No, a person cannot just clean a check engine light to pass inspection. The issue causing the check engine light must be dealt with and fixed.
Why doesn't your service engine soon light come on when you go to start your 2003 astro?
If you are referring to the Check Engine light then the bulb is either blown or has been blacked out on the dash by a crook.
