0
just put a manual valve body in it
You are going to need a number of parts to do it right. You will need a manual transmission, clutch, pressure plate, throw-out bearing, thrust bearing for the front of the yoke, flywheel, shifter, bell housing with clutch fork, transmission hump extension to house the shifter, shift boot, linkage to steering column, "z" bar linkage to clutch pedal, clutch linkage boot, clutch pedal, narrow brake pedal, clutch bumper, starter cutout switch for clutch, steering column switch to change the timing of the backup light operation. You will need to adjust the wiring under your dash somewhat to get the clutch starter cutout switch operational.
The yoke on the front of your drive shaft will need to be changed to a yoke that matches the splines in the manual transmission that you are swapping to. The length of your drive shaft needs to be checked to make sure there is the proper play to allow for suspension flex. you do not want the drive shaft to push the yoke into the transmission and break something when you hit a big speed bump.
I'm assuming your car (1978 Camaro) was a floor shift to start with and you will be using a manual transmission with a floor shifter. dont forget you will need the pedals for the thing as well.
What else can I help you with?
What transmissions are compatible with a 1988 Chevy Camaro?
Both automatic and manual 5.0
How do you convert a 1995 Chevy Camaro automatic to a manual shift?
Hi go to this web site, look in left column a4 to 6m http://z28.com/
Will a automatic rearend work on a manual in a Chevy Camaro 1994?
Yes, Their is no difference between the rearends of a stick or automatic vehicle.
Is a 1985 Chevy Camaro a stick?
No its an automatic
What transmission will you need to convert a 1983 berlinetta Chevy Camaro 305 5.0l to an automatic?
Best choice would be a TH700-R4
What transmission is in a 1997 Chevy Camaro 3.8 v6?
Automatic or 5spd
What trans comes in 89 Chevy Camaro rs?
The 1989 Chevy Camaro RS typically came with a 4-speed automatic transmission or a 5-speed manual transmission, depending on the engine option chosen. Most models were equipped with either a 2.8L V6 or a 5.0L V8 engine. The automatic transmission was more common, while the manual option provided a sportier driving experience.
Where do you find a diagram for a wiper motor on a Chevy Camaro?
autozone.com has the camaro manual online, try there.
What type of automatic transmission comes in 1998 Chevy Camaro?
It's a 4L60E.
Can you install a 6 cylinder manual transmission in a 1996 Z28 Chevy Camaro?
you can install an automatic transmission, but i wouldn't try one from a v6 unless your motor is a v6 as well
What transmission was in a 1991 Chevy Camaro z28 with 350 v8?
The ONLY transmission that came in the 1991 350 Z28 was a four speed Automatic 700R4. IF it has a manual it was added by someone.
How do you convert automatic to manual transmission for 1992 Chevy beretta?
To convert a 1992 Chevy Beretta from automatic to manual transmission, you'll need to gather a compatible manual transmission, clutch assembly, pedals, and necessary linkage. Begin by removing the automatic transmission and associated components, then install the manual transmission along with the clutch pedal and master/slave cylinder. Modify or replace the wiring harness if needed, and ensure the driveshaft and mounts are compatible. Finally, fill the manual transmission with the appropriate fluid and test the system before driving.
