It either works or it doesnt. Check the fuse and the connection under the seat. If both are ok, the heating coil is probably dead. About $700 to fix.
Fasten the seat belt.
Under the rear seat on the passenger side.
The battery is located under the back seat bottom.
To remove the back seat from a 2008 Buick Lucerne, first, locate the seat release mechanism, typically found at the base of the seat or near the rear seat bottom. Pull the release levers or push the buttons to unlock the seat. Next, lift the front of the seat bottom to detach it from the clips, then pull it out. For the backrest, locate any bolts or clips securing it, remove them, and then tilt and lift the backrest out of the vehicle.
It is under the rear seat. Puch in at the botton of the seat on both sides, and lift the seat up.
To remove the driver’s side front seat in a Buick Lucerne, first, slide the seat all the way forward to access the rear bolts. Use a socket wrench to remove the bolts, then slide the seat back to access the front bolts and remove those as well. Disconnect any electrical connectors beneath the seat, if equipped with power adjustments or airbags. Finally, carefully lift the seat out of the vehicle.
To remove the rear seat from a 2006 Buick Lucerne, start by locating the release tabs or bolts at the base of the seat cushion. Lift the front of the cushion to disengage it from the hooks or clips, then pull it out. For the seatback, look for bolts or clips at the bottom and sides, remove them, and then lift the seatback upward to detach it. Always consult the vehicle's manual for specific instructions and safety precautions.
To remove the seat in a 2006 Buick Lucerne, first, slide the seat all the way forward to access the rear bolts. Use a ratchet and socket to remove the two rear bolts, then slide the seat back to access the front bolts and remove them as well. After all bolts are removed, carefully lift the seat out of the vehicle, disconnecting any wiring harnesses if equipped with power features. Be sure to keep track of the bolts for reinstallation.
To remove the front seat in a Buick Lucerne, first, slide the seat all the way forward to access the rear mounting bolts. Use a socket wrench to remove the bolts, then slide the seat back to access the front bolts and remove those as well. Disconnect any electrical connectors for power seats or airbags, if applicable, and carefully lift the seat out of the vehicle. Always consult the owner's manual for specific instructions and safety precautions.
In the 2007 Buick Lucerne, the fuel filter is integrated into the fuel pump module, which is located inside the fuel tank. To access it, you typically need to remove the rear seat and then the fuel tank. It's advisable to consult the vehicle's service manual for detailed instructions if you plan to replace it.
In my 2009 it is under the back seat. There is probably also a second fuse panel in the engine compartment. Consult your owner's manual for details.
How do you fix 1998 buick regal GS heated seat, on driverside , Right side still heats I need book on seats from the people that made the seats.