You can bypass it by removing the three pin plug from the lock cylinder. This will only be successful if done while the engine is running. It will remain in "code accepted mode" with wires disconnected at this time and no new inputs! This proccess may or may not need to be repeated if battery power is lost.
yes you can easily disable this passlock system. simply cut the yellow small wire from ign. switch in the column up by the switch. this is the passlock wire. dealer says it cannot be done, they lie however.
Hit it hard with a hammer.
You really can't turn it off. They sell bypass kits, but the passlock system has to be working in order for the bypass thing to work.
It is improper to answer questions that could aid a thief.
Cutting the yellow wire may disable the passlock system, but you might need to reconnect it depending on the type of vehicle and passlock system. It's important to consult a professional or refer to the vehicle's manual for specific instructions to ensure safe and proper handling.
cut the yellow small wire from ign. switch in the column up by the switch. this is the passlock wire.
go to tube sound.com to disable passlock system for good. (just type in problem). type in tubesound.com/passlocksystem. have a good day!!
no pude arrancarlo
If the security light is flashing on the dashboard when the key is on the "on" position, the passlock system is enabled. Refer to you owner's manual to deactivate the passlock system.
how do you bypass passlock system
It does have the passlock system, what is the question?
unhook