Buckle the seat belt around the back of the seat
it tells you in the owners manual page 26
Ask your dealer
Buckle up your seat belt and the chime will go off.
Buckle up your seat belt and the chime will go off.
To disable the seat belt chime on a 2017 Dodge Journey, you typically need to follow a specific sequence with the ignition and seat belt. Start with the ignition off, then buckle and unbuckle the seat belt three times, ending with the seat belt unbuckled. Turn the ignition on and off again to complete the process. If this method doesn't work, consult the owner's manual for additional instructions specific to your vehicle.
Put on your seatbelt. It it is still chiming with your belt on, take it back to the dealer for repair. It is under warranty.
To disable the seat belt chime in a 2015 Honda CR-V, you can follow these steps: First, turn the ignition to the "ON" position without starting the engine. Buckle and unbuckle the driver's seat belt three times, then turn the ignition off. This process should disable the chime. However, be sure to always wear your seat belt for safety.
By wearing your seat belt.
Buckle your seat belt.
Use the seat belt and buckle up.
To disable the seat belt chime on a 2011 Hyundai Sonata, first, ensure the vehicle is in the "On" position without starting the engine. Fasten and unfasten the driver's seat belt three times, ending with the belt unfastened. After the third unfastening, the chime should stop; you may hear a confirmation chime. If done correctly, the seat belt reminder chime will remain disabled until the battery is disconnected or the procedure is repeated.
Once you put your seat belt on and buckle it the chime will go off. If it does not then take the car to the dealer for warranty repair.