0
How do you disable the seat belt chime in a 2000 Ford Explorer XLT It continues to chime even when the belt is buckled?
The buzzer is located inside the gauge pack directly over the steering wheel. First remove the speedometer rpm gauge pack from the dash. To do so there are numerous trim pieces and tiny hex head screws to remove. Also there are three electrical plug connectors to remove as well. There is no speedometer cable like the old days. These are electrically/computer controlled components. You will also need to carefully disengage the shift indicator. You will need to carefully extract the gauge pack over the steering wheel. It may take some doing, but don't force anything. It does come out, but it is tight.
Once out, remove the many screws holding the black plastic backing/protective cover. The circuit board comes off the push pins with minor persuasion/pulling once the screws are removed. On the circuit board you will see a smallish 3/4" to 1" diameter round buzzer. This is the piece to get
Carefully take a small snip to the opening and carefully cut it open. Don't break it off or crack the circuit board in any way, other than opening up the top face of this 'buzzer/chime'. Once it is opened you will see a very thin/round piece of metal like tin inside. Remove that with a tiny screwdriver by carefully digging it out. A small needle nose or forceps may help here. Clean out the buzzer guts. Blow all pieces of debris from the circuit board and now reinstall the board on the pins and replace the cover and secure with all screws that were removed. Reinstall the gauge pack carefully in reverse order of removal. Reinstall all trim piece.
The buzzer is gone. No chimes ever again
What else can I help you with?
How do you fix a seatbelt reminder chime in a 2000 Ford Explorer XLT when it continues to go off intermittently even with the seatbelt buckled?
what you do is take it in to the shop and tell them and if that doesn't work sell it and buy a new one.
Disable seat belt chime 2007 civic?
Buckel your seatbelt and it will go off. If it is not going off with your seatbelt buckled, then take it to the dealer for repair.
How do you disable door chime on 1999 F250?
if you have the owner book that came with the vehicle, you can find in the book how to disable the door chime
How do you make your seat belt chime stop on your 2008 dodge ram?
To turn off the seatbelt chime in 2006-2008 Dodge Rams and some other newer Dodge vehicles, follow this procedure: Get in the vehicle, close the door, put on your seatbelt. Start the engine, wait for the seatbelt light to turn off. Within 30 seconds of the light turning off, unbuckle and re-buckle the seatbelt 4 times, making sure the seatbelt light responds (turns on and off) each time you unbuckle and re-buckle the belt. Ending with the seatbelt BUCKLED, turn off your engine. If done correctly, you will immediately hear one chime to verify the programming. To re-enable the chime, simply repeat this procedure. NOTE: Although the seatbelt chime will not chime constantly if your belt is not buckled while driving, it WILL still chime when you first start your engine, and the seatbelt light will stay on to remind you. The light can be deactivated also, but it is a much more complicated (and I feel unnecessary) procedure. WARNING!!!: DO NOT deactivate the seatbelt chime by cutting or splicing the wires to the seatbelt buckle under the seat. THIS WILL DISABLE YOUR AIRBAGS even if your belt is buckled!!! AIRBAGS are DEADLY if your belt is not buckled, so there is a sensor in the buckle which disables the airbags when the belt is not buckled. If you cut or splice these wires, you also disable that sensor. Turning off the chime using the programming option keeps your airbags working properly. Hope this helps, ENJOY YOUR DODGE!!! -Mike Vidal, Forked River, NJ
How do you disable the check engine chime on my 2008 pt cruiser?
The chime can not be disabled or removed.
How do you disable airbag chime on 2001 f250?
instructions to disable chime can be found in the ownere handbook that came with the truck it is disabled thru the computer in truck
How do you disable the seat belt chime on Nissan Armada?
To disable the seat belt chime on a Nissan Armada, start by turning the ignition to the "On" position without starting the engine. Buckle and unbuckle the driver's seat belt three times within 10 seconds, then buckle it once more and leave it buckled. Turn the ignition off, and the chime should be disabled. If it doesn't work, you may need to repeat the steps or consult the owner's manual for specific instructions related to your model year.
How do you disable the seat belt chime on a Honda?
Buckle up your seat belt and the chime will go off.
How do you disable the Honda Ridgeline door chime?
To disable the door chime on a Honda Ridgeline, locate the vehicle's fuse box, which is usually found under the dashboard or in the engine compartment. Identify the fuse associated with the door chime; this information can be found in the owner's manual. Remove the fuse to stop the chime from sounding when the doors are open. Keep in mind this will disable the chime entirely, so be cautious as it may affect other functions.
How do you disable the seat belt chime on a Honda Accord?
Buckle up your seat belt and the chime will go off.
Why can't I somehow disable the chime?
The manufacturers don't want you to.
Disable ignition warning chime in Chevrolet?
Pull the key out just a little and the chime will stop. It may be controlledfrom the radio
