There are drain plugs on each side of the block. They are difficult to reach unless you have the car on a lift.
where is the radiator drain plug on a mercury villager
There is a drain plug in the transmission pan.
The radiator drain plug is at the passenger side rear of the radiator at the very bottom corner. There are two drain plugs in the block, they are very difficult to get at, and usually not necessary.
You mean the oil drain? In the oil pan.
Open the drain plug on the passenger side of the radiator.
I have a 95 villager and it came from the factory with a block heater.Look around the headlights for the plug tucked away.
In the bottom of the transmission pan.
On the oil pan. -> -> -> On the bottom.
The coolant drain plug for a 2002 Mercury Villager with a 3.3L engine is located on the engine block, typically at the lowest point to allow for effective draining of the coolant. To find it, look for a small, threaded plug or bolt on the side of the engine block, usually near the oil pan. It's advisable to consult the vehicle's service manual for specific details and proper procedures when draining coolant. Always ensure the engine is cool before attempting to drain the coolant.
under the hood
It's on the passenger side, at the very bottom, in back.
I would not recommend that you try. A block heater is preferred.