0
What else can I help you with?
Where is the PCV valve located on a 2000 Ford Ranger 2.5 4-cylinder?
Look on the back of your valve cover and you should find it.
Where can you find the idle air control valve on a Ford Ranger?
The Idle Air Control (IAC) valve is mounted on the throttle body
Where do you find the EGR valve on a 1992 Ford Festiva?
1990 -1993 injected Festivas do not have a EGR valve
Where do you find the idle air control valve in a 1990 ford tempo?
on the intake
Where can you find the PCV valve on a 1990 Honda civic cx 15 and the EGR valve?
im not sure on a 1990 but on my 93 civic ex 1.6 vtec the PVC valve is on the intake right under the fuel rail
Trying to find where PVC value goes on a 1990 ford ranger 4x4 2.3 engine?
On a 1990 Ford Ranger 4x4 with a 2.3L engine, the Positive Crankcase Ventilation (PVC) valve is typically located on or near the engine's valve cover. It is a small component that connects to the intake manifold or air cleaner assembly via rubber hoses. You may need to remove the air cleaner or other components for better access. Consult the vehicle's service manual for specific diagrams and instructions if needed.
What website can you find a fuse box diagram of a 1990 Ford Ranger?
There is a website called The Ranger Station that might have the fuse box diagram. Don't know the URL, but you can probably find it through Google.
How do you find and clean an IAC valve on a 93 ford ranger 30 L?
the iac is on the throttle body. take the cover off of the throttle body to get to it theres 2 screws to take out for it to come off. clean off the old gasket be careful not to damage the gasket mating. and they recomend that you not use any solvent on them
Where do you install a PCV valve into a 1997 ford ranger xlt 2.3L?
On a 1997 Ford Ranger XLT with a 2.3L engine, the PCV valve is typically installed on the valve cover. You can find it located near the rear of the engine, where it connects to a rubber grommet. Ensure that the valve is seated properly and that the connecting hose is also in good condition to maintain proper ventilation.
Where is the PCV valve on a 1988 ford ranger 2.9 liter lacated?
It is located behind (toward the rear of truck) The oil add chamber on the passanger side valve cover. Pull the hose out of the valve cover and there you'll find the PCV Valve
Where can you find a diagram for the fuse panel of a 1990 ford ranger if you do not have the owners manual?
autozone.com has free online manuals
Where is the PCV valve on a 2002 ford ranger 2.3 located?
On a 2002 Ford Ranger with a 2.3-liter engine, the PCV (Positive Crankcase Ventilation) valve is located on the valve cover. You can find it near the rear of the engine, typically on the driver's side. It is a small, cylindrical component that may be secured with a grommet or clamp, making it accessible for replacement or inspection.
