should be a plate mounted on one of the bolts on the chunk that will tell you the chunk is the big thing in the middle of the axle
Behind the wheels, attached to the axle.
There are three ways to find a gear ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
3.08
To check the rear axle ratio on your Suburban, you need to safely jack up the vehicle to get access to the the rear axle. Then there should be a metal tag on one of the bolts on the rear axle cover indicating the axle ratio. The ratio varies with different options and load capacities, so it's not the same for all Suburban's.
Over the rear axle
depends on the options chosen at purchase, call g.m with axle number
Inside the rear axle.Inside the rear axle.
That is done through the dealers computer system. There isn't one specific digit in the vin for the axle ratio.
Like 3 .42
103 ft/lbs
36mm.
These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92 These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92