disconnect the electric harness goop on die electric grease and plug harnesss back on it work ed for me
Linkage disconnected or broken
replace the pulse board on wiper motor which is a black cover
How to replace wiper motor on a 1998 montero sport mitsubishi
The wiper motor on a 1998 Chevy Venture is up under the vents next to the windshield. It is bolted to the firewall.
To replace a windshield wiper motor for a 1998 F150, first remove the bottom trim on the window. Then remove both wiper blade assemblies and all screws on the metal cowling. Remove the retaining clip from the wiper motor linkage and pull the controls rods off.
If the windshield wipers are not working in a 1998 Ford F150, the cause could be a blown fuse. There could also be a problem with the vacuum hoses connected to the wiper motor or the wiper motor itself.
Mounted on the firewall directly behind the brake master cylinder reservoir. UNDER WINDSHIELD WIPER COWL COVER remove the wiper arms remove the windshield wiper cowl cover disconnect the eletrical connector from the wiper motor and remove the motor remove the wiper motor retsining bolts pry the linkage arm off the wiper motor pin with large screwdriver
No.
Your wiper arms that run from the wiper motor to the windshield wipers may be binding and need to be replaced
It is located right on the windshield washer reservoir. It looks like a short black cylinder.
Under the hood, on the firewall, drivers side.
the pulse board is bad. it bolts onto the wiper motor.