There is no fixing it, it must be replaced.
no, different trans and size of flywheel
around 130 at the fly wheel
The transmission has to be removed. Once the trnsmission is removed the fly-wheel is right there to be removed.
Wrong starter, wrong fly-wheel, Bad starter drive, worn fly-wheel. Starter may need to be shimed.
In between the engine and transmission
190 at the fly wheel.
The transmission must be removed to change the flywheel.
A automatic has a flex plate and a tork converter.. A manual trans has flex plate and fly wheel...
You can either pull the transmission out are pull the engine out. Your choice 1 or the other.
I have seen some that would go in backwards But 99% of them will not set flat on the fly-wheel if it is backwards. The clutch disk will hit the fly-wheel bolts if not installed right.
did you need removed the transmission then tranfer case and put the fly wheel
You will either have to remove the transmission and fly-wheel to remove them or you can pull the engine out and then remove them.