answersLogoWhite

0

If you have an engine code that is saying misfire on these cylinders it is usually a bad coil on the plugs of those cylinders. You are probably going to need to have them replaced. Check and replace the plugs if necessary.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is p302 code on Ford F-150?

P0302 is a #2 cylinder miss-fire


3 4 6 cylinder miss fire on 1999 ford explorer 4.0?

Take it to a garage.


Ford Ranger miss fire?

have a miss fire on a3.0 1998 ford what are possible causes


Miss fire cylinder nomber 2 Ford Escape?

A cylinder misfire on cylinder 2 in a Ford Escape engine indicates a faulty spark plug, plug wire, or ignition. Hooking an OBDII code reader to the vehicle can narrow down the cause.


How do you fix multiple cylinder miss fire on a 2000 v6 Ford Winstar?

For a good start, try some of the suggestions and ideas in the "Related Question" below.


How do you change the spark plugs on a 1997 Ford Expedition Eddie Bauer edition 5.4L engine?

My #1 cylinder is miss firing, I'm thinking coil or plug? I don't know much about this car.


What do I do bout a number 2 cylinder misfire?

What do I do bout a 2 cylinder miss fire on a 2008 Mitsubishi Eclipse


How do you fix a miss fire on cylinder 5?

Each cylinder needs fuel, compression and spark. You are missing one of those.


What makes a 86 ford ranger 2.9 engine miss fire and run rough on one cylinder still after replacing plugs wires and cap wires are put back correctly?

do a compression check on that cylinder. check fuel injector for pulse.


Why does 1999 Ford Taurus sputter in the rain?

Most common cause would be the plus wires. Dampness causes them to arc and the cylinder that the wire is arcing on won't fire causing a miss/sputter.


How do you fix a ford fusion cylinder that is miss firing?

First you have to determine if it is a spark problem or a fuel problem.


What does miss fire mean for a check engine light?

A mis fire occurs when the fuel/vapor mixture does not ignite and burn properly in a cylinder.