How do you fix a power window on a Windstar?

Answer 1

I am having the same problem as you are with my 95 Windstar but my windows work intermitantly. First thing I would do is check the fuses. There are separate fuses for driver and passenger windows. If this isn't the problem then I would check the relays for the windows. They might be sticking or something. You can buy new ones from NAPA for about $7 each. I personally try the cheap approach first. If this isnt the answer, then get a tester and see if you have power to the window motor. If you do have power when the door switch is activated, then you have a bad motor. I would then recommend that a dealer replace because glass breaks easily.

Also Try this!!!

Make sure the motor is in fact bad... Many times they just stop working because the armature brushes hang up and will not make contact with the motor armature. Sometimes you can slam the car door and this will jar the brushes and they will make contact with the armature. If this doesn't work you will need to remove the door panel and reach inside the door where the window motor is located and tap the electric motor with a small hammer or some other suitable object. While you are tapping the motor have someone hold the window switch in a functioning position, either up or down depending on the position of your window. I have done this many many times and hopefully it will work for you and you will not have to replace the motor. Good luck