Sometimes this fault code is because the gas cap wasn't properly tightened after the last fill-up. Re-tighten the gas cap making sure it clicks three times. I think the engine light will go out on its own after 25 starts.
Trouble code P0452 means: Evaporative emission control system,pressure sensor low input
Trouble code P0456 means: Evaporative emission (EVAP) control system leak detected (very small leak)
The gas cap warning light on a 2008 Chrysler PT Cruiser means that the fuel cap may be loose, missing, or not properly sealed. This can cause a leak in the fuel system, which affects the vehicle’s evaporative emissions system.
A 2002 Chrysler PT Cruiser was not built with any GPS system.
A 2004 Chrysler PT Cruiser does not have a kill switch. The fuel system is computer controlled with a relay.
Code P1495 on a 2002 Chrysler PT Cruiser indicates a problem with the evaporative emission control (EVAP) system, specifically related to the vent control valve. This code typically arises from issues such as a faulty vent valve, a clogged EVAP line, or a leak in the system. It can also be triggered by problems with the fuel cap or the EVAP canister. Diagnosing the exact cause usually involves checking for leaks, inspecting the valve, and ensuring all components are functioning properly.
A 2002 Chrysler PT Cruiser was not built with any GPS system.
Unlock the doors with the remote.
Trouble code P0441 means: Evaporative Emission System Incorrect Purge Flow
Evaporative Emission System Switching Valve Control Circuit/Open This is referring to a problem with the evaporative emission system. A technician should be able to determine exactly what part of the system is malfunctioning.
There isn't a separate fuse for the cruise control. The system is powered by the engine computer. If the car runs, it is not a fuse problem.
Trouble code P0452 means: Evaporative Emission System Pressure Sensor/Switch Low Input