To fix a throttle cable on a Craftsman snowblower, first, ensure the engine is off and cool. Locate the throttle cable and check for any signs of damage or disconnection. If the cable is frayed or broken, replace it by detaching it from the throttle lever and the carburetor, then install the new cable by securing it in the same positions. Adjust the tension as needed to ensure smooth operation before testing the snowblower.
the throttle cable itself will have to be replaced. the cable is most likely fraying internally.
The cable must be replaced if damaged.
cut the outer tubing back or raplace it
To fix a throttle on a 120cc mini chopper, first, inspect the throttle cable for any frays or damage; replace it if necessary. Check the throttle grip and ensure it moves freely without obstruction. If the throttle is sticking, clean the throttle housing and lubricate the moving parts. Finally, adjust the cable tension to ensure proper throttle response and verify that the carburetor is functioning correctly.
Chances are the throttle cable from the pedal to the throttle body needs replacing.
1st check throttle housing,then if it is the cable getting stuck you can oil it a little bit
you will need to replace the throttle cable, and while you are at it check the return spring.
Its not a kickdown cable its a throttle pressure cable. Take it to your local shop. They might do it for free. If not they might do it for an hour of labor
Sounds like you've got a kinked cable somewhere. Check them and if so, replace.
To fix the cruise control cable on a 2003 Ford Escape, first, ensure the vehicle is parked and the engine is off. Locate the cruise control cable, typically found near the throttle body, and inspect it for wear or damage. If the cable is broken or frayed, it will need to be replaced; disconnect it from the throttle body and the cruise control module, then install the new cable by reversing the removal process. Finally, test the cruise control system to ensure it's functioning properly.
Check for a floormat catching on the accelerator. If not the floormat, usually is a mis-routed cable where it comes out of the cable jacket and loops around the throttle shaft. This will hurt you or your engine if left alone-- please fix it quickly. You can check throttle operation with engine off.
merced throttle body s420