That depends on what the malfunction is. Start with checking for trouble codes.
That depends on what the malfunction is. Start with checking for trouble codes.
The 5.7L Hemi does not have an idle control valve. Idle speed is regulated by the computer by opening or closing the throttle plate itself. The motor is a non serviceable part of the throttle body. The entire throttle body would need replaced if malfunctioning.The 5.7L Hemi does not have an idle control valve. Idle speed is regulated by the computer by opening or closing the throttle plate itself. The motor is a non serviceable part of the throttle body. The entire throttle body would need replaced if malfunctioning.
The EML (Electronic Motor Load) system on a 2000 BMW Z3 refers to the electronic control unit that manages the throttle response and engine performance. It works in conjunction with the vehicle's accelerator pedal to optimize engine power and efficiency. If the EML light is illuminated on the dashboard, it typically indicates a fault in the throttle system, which may require diagnostic troubleshooting to resolve. This system is crucial for ensuring proper engine operation and responsiveness.
It depends on the year of the vehicle, whether it's throttle body injected, electronic ignition...
EML stands for Elektronische Motorleistungsregelung in german. Translated it means "electronic power control". It controls your electronic throttle body. Many models of BMW automobiles do not have a physical cable controlling the throttle. When you press on the gas pedal a sensor sends a signal to the EML, then the EML operates an electric motor in the throttle body to open the throttle and you go.
P1128 TOYOTA - Throttle Control Motor Lock MalfunctionPossible causes, Faulty Throttle Control Motor,Throttle Control Motor harness is open or shorted,Throttle Control Motor circuit poor electrical connection
To fix the EML (Electronic Motor Load) light on a BMW 325i, first, check for any diagnostic trouble codes using an OBD-II scanner to identify the specific issue. Common causes include a malfunctioning throttle position sensor, issues with the throttle body, or problems with the engine management system. After diagnosing, repair or replace any faulty components, clear the codes, and test drive the vehicle to see if the light reappears. If the problem persists, it's advisable to consult a professional mechanic for further diagnosis and repairs.
The computer uses a motor in the throttle body assembly to open the throttle plate. There isn't a separate idle air control motor.The computer uses a motor in the throttle body assembly to open the throttle plate. There isn't a separate idle air control motor.
There isn't a separate IAC motor. The electriconic throttle body assembly has a built in motor that opens and closes the throttle plate. The throttle body is not repairable, it must be replaced.
The OBD code "ETV MTR FB" typically refers to issues related to the Electronic Throttle Valve (ETV) Motor Feedback in a vehicle's engine management system. This code indicates that there may be a malfunction in the throttle control system, which can affect engine performance and responsiveness. It is important to diagnose the specific issue, as it could involve electrical problems, sensor failures, or mechanical faults within the throttle assembly. Proper troubleshooting is essential for resolving the issue effectively.
The motor chokes at full throttle because either the exhaust valves are bad and cause the motor to loose compression at full throttle or the carb has an air leak.
In a hydraulic system, the throttle valve is typically located in the hydraulic line, often between the pump and the actuator (such as a hydraulic cylinder or motor). It regulates the flow rate of the hydraulic fluid, controlling the speed and power of the actuators. By adjusting the throttle valve, operators can fine-tune the system's performance to meet specific operational needs.
The throttle position sensor is on the throttle body at the end of the throttle shaft.