0
Alignment of the latch strikes, door tracks, flush fit, and height, can be pretty involved. Define 'fix'. Mine was making a terrible, metal-tometal grinding sound when used. I had to replace the top slider (I think there are three - one on top, and one in the middle and , of course, one on the bottom -- so check them all!). It was a bit of a bear to do by myself, but it was worth it. The part cost me about $30. If it is stuck shut try this. I have a 1991 Aerostar that had the same problem. You have to remove the inside door panels. follow the door mechanism from the front to the back (You won't be able to see it at the back) What I did was to cut a small hole (1-2 inches) near the back of the door to be able to see the rod. I found that were the rod connects to an "L" shaped part the "L" was bent outwards (toward the outside of the door). By bending it back towards the inside of the door I was able to get the door open. I had the same problem on MY 91 Aerostar and that was the fix it needed.....and gave me an excuse to buy the Dremel I always wanted.....lol. After cutting the access hole I was able to see the rod was bent. Thanks!
What else can I help you with?
How do you fix a locked-up electronic door lock on a 92 Ford Taurus?
We have a 92 Ford Aerostar minivan and our sliding door locked up for a year - even ford could not fix it. My dad reset the computer (disconnect the battery for five minutes) and it has worked for almost a year now.
How do you fix 1994 ford Aerostar van sliding door if it doesn't open?
To fix a 1994 Ford Aerostar van sliding door that doesn't open, first check the door's track for any obstructions or debris that may be blocking its movement. Inspect the door latch mechanism for any signs of damage or malfunction; lubricate it with penetrating oil if it appears stuck. Additionally, ensure that the child safety lock isn't engaged, as this can prevent the door from opening. If these steps don't resolve the issue, you may need to inspect the door's wiring or consult a professional for further diagnosis.
How do you fix the gas gauge on a 1991 Ford Aerostar?
how do you fix a gas guage on a 1989 ford aerostar
How can I fix a sliding screen door that is not sliding properly?
To fix a sliding screen door that is not sliding properly, you can try cleaning the tracks, lubricating the wheels, adjusting the rollers, and ensuring the door is properly aligned.
How to fix passenger sliding door?
The passenger sliding door of a Ford Windstar LX needs frequent cleaning and checking of the rubbers to prevent jamming. If a door jams a lot during sliding, take out the rubber linings and clean them up before re-attaching.
How do you fix a Honda odyssey sliding door cable that broke?
Honda Odyssey sliding door cable repair
How do you fix the latch on a Ford Freestar on the driver side passenger sliding door?
Can you tell me anything about a 2008 Hyundai interrupt it is a call Honda
How do you fix a windstar sliding door?
you have to just keep trying to open it
How can you fix your Windstar sliding door window yourself?
To fix the sliding door window on a Ford Windstar, start by removing the door panel to access the window mechanism. Inspect the window regulator and tracks for damage or debris, and lubricate any moving parts with silicone spray. If the regulator is broken, replace it with a new one. Finally, reassemble the door panel and test the window to ensure it operates smoothly.
How can I fix a pocket door that is not sliding properly?
To fix a pocket door that is not sliding properly, you can try adjusting the rollers or tracks to ensure they are aligned and lubricated. If that doesn't work, you may need to replace the rollers or tracks to improve the door's movement.
How do you fix the shifter linkage on a 1993 Ford Aerostar?
Take it somewhere and get somebody that knows shat they're doing to fix it.
The door handle on your 1995 Ford Aerostar works inside but not on the outside how can you fix this?
the door on my 94 aerostar only opens from the outside and only if you hold the lock button up on the inside while you pull the handle. it is a pain it the but. i am going to take it apart this weekend and maybe i can help you next week. it is probably just a hook or latch that came off inside the door.
