depending on the year check for factory recalls had same issue on my 1999 and they replaces the internal components for free, even the worn ones that were not included in the recall.
The left or right tailgate cable comes as an assembly that includes the left or right side tailgate latch.
the glass door will not latch on to the tailgate of the jeep
To replace the tailgate latch on a 2003 Nissan Frontier, first, open the tailgate and remove any screws or fasteners securing the latch assembly. Disconnect the latch mechanism from the tailgate by releasing the clips or bolts. Install the new latch by reversing the removal process, ensuring it is securely fastened and properly aligned. Finally, test the tailgate operation to ensure the new latch functions correctly.
how can i repair a 94 chevy k1500 tailgate latch. cannot open gate
Can you be just a little more specific? Fix what? the latch mechanism, a hinge? Do you want to know how to take it off?
To repair the tailgate bottom latch on a 1998 Toyota 4Runner, first, remove the plastic cover from the tailgate to access the latch assembly. Inspect the latch for any broken parts or misalignment; clean and lubricate the mechanism if it appears dirty or rusty. If any components are damaged, replace them with new parts. Reassemble the tailgate and test the latch to ensure it operates smoothly.
The tailgate latch comes off with the cable. It is one piece.
If your Pontiac Aztek's tailgate won't go down, first check the latch mechanism for any obstructions or damage. Use a lubricant on the latch and hinges to ensure they move freely. If the issue persists, inspect the wiring and the tailgate release switch for any faults. If necessary, consult the vehicle's manual or seek assistance from a professional mechanic for more complex issues.
You need to order the part(s) first, which you can do at your local Toyota dealership or at an auto parts store. Then, you simply disassemble the tailgate, remove the defective latch component, and put in the new part, and then reassemble the tailgate.
Get you a good chisel, hammer and bust the thing into pieces, only way, bro. Just did one on a 1997 QX4, same latch.
lmc truck, there on the web
remove the panel from the gate (it may be difficult if the gate is still closed). there is a metal panel held w/ screws; remove that panel and the latch will be visible. pull both rods at the same time to unlatch the gate (careful, the space is small and the truck loves to pinch!).