The easy way is to buy a flush kit from prestone ($7) and follow the directions. You will basically be splicing in a tee fitting that accepts your garden hose, and adding a can of flush to the cooling system. After 10 minutes of run time you will turn or the hose and 'backflush' the old coolant out the top of the radiator. Messy, but it works. I hope this helps you. Mark
The radiator drain is on the bottom of the radiator, generally under the lower hose.
i got no idea
yes
blower motor eltavolitas 1998 acura tl3.2
How do you replace a radiator in a 1993 suburban?
It is on the inside bottom right corner of the radiator. Towards the engine. It will be a plastic drain cock. It is hard to see, but it is there,
Replace, flush, or repair, depending on what the problem is.
Remove The Radiator And Have A Radiator Shop Test, And Flush It.
wher is the radiator cap on a 2001 chevy suburban
Just flushing the radiator, no but to flush the system, yes.
Take off the radiator cap while cool. Open the radiator and start to drain into a bucket. Use water hose to run water into the radiator until the water drains clear.
there is a radiator plug on the bottom passenger side of the radiatior, take that out and flush from the radiator cap.