If I understand you right the door is opened and won't close because the latch is tripped. Lift up on the door handle and take your finger or a screw driver and move the latch to the open position
Try disconnecting your battery and reconnecting it this should reset the door.
Just going by the question...I would say that the latch has gotten in "the closed door position". Be sure that the door is unlocked. With your finger lift out on the latch on the end of the door and use the door handle to "open" the door latch.
Replace the door latch.
passenger side. open the passenger door, look on the side wall that is covered when the door is closed.
The door latch may be stuck closed due to a mechanical issue, such as a misalignment of the latch mechanism or a buildup of debris preventing it from moving properly.
The purpose of the door frame latch plate is to provide a secure point for the door latch to engage with when the door is closed. This helps to keep the door securely closed and prevents it from swinging open unintentionally. The latch plate contributes to the overall functionality of a door by ensuring that it can be easily opened and closed, while also providing security and stability to the door when it is closed.
put a new latch in If the car has been setting for a while I would start by spraying some wd40 on the latch mechanism ,if that don't help try adjusting the striker and the door alignment Get the door open, pull the panel, adjust latch manually to diagnose or if replacement is needed
The only way I found is to rotate the door latch that closes around the striker so the truck thinks the door is closed
To install a latch for a bifold door to ensure it stays securely closed, you can follow these steps: Measure and mark the placement of the latch on the door frame and the corresponding location on the door. Use a drill to create pilot holes for the screws. Attach the latch to the door frame and the door using screws. Test the latch to ensure it securely closes the bifold door. By following these steps, you can effectively install a latch to keep your bifold door securely closed.
You have to take the door panel off and check the latch attachment, go to any auto parts store to show step by step instructions.
left door latch is broke
To install a latch for a sliding door to ensure it stays securely closed, you can follow these steps: Choose a latch that is suitable for sliding doors and matches the design of your door. Measure and mark the placement of the latch on the door frame and door. Drill pilot holes for the screws. Attach the latch to the door frame and door using screws. Test the latch to ensure it securely closes the sliding door.