0
To remove the fan from the water pump on a 1999 Chevy van, first, ensure the engine is off and cool. Disconnect the negative battery terminal, then use a wrench to hold the water pump pulley in place while you loosen the fan clutch bolts. Once the bolts are removed, carefully detach the fan from the water pump by pulling it straight off. Be cautious of any coolant that may spill during the process.
What else can I help you with?
Where is the water pump on a 1997 Chevy Z 71?
Behind the fan, if you yake off the engine fan will descover the water pump regards David
How do you take fan off water pump on 2006 Chevy truck?
Take the bolts of the fan blades
How do you replace a water pump in a 1996 Chevy silverado c1500 5.7l?
Drain the coolant, pull off the top half of the fan shroud take the fan off of the pulley, remove the belt take the coolant hoses off of the pump and take out the four bolts that hold on the pump.
How do you remove fan and water pump on 1999 Chevy g-3500 express van?
To remove the fan and water pump on a 1999 Chevy G-3500 Express van, first disconnect the negative battery cable. Then, drain the coolant from the radiator and remove the fan shroud for better access. Next, detach the fan clutch from the water pump by using a special tool or a wrench, and then remove the bolts securing the water pump to the engine block. Finally, carefully pull the water pump off, taking care not to damage the gasket surface.
How do you get the fan assembly off to replace a water pump on a 1998 Chevy truck?
Remove the 4 nuts that are against the pulley behind the fan with the belt still on the truck. Once these nuts are removed, the fan will separate from the pulley. Now you can remove the belt & water pump pulley.
How do you get the fan clutch off of a 1999 gm safari to replace the water pump?
fan clutch screws off water pump fan pump has left hand thread so to remove you need to turn clockwise
How do you replace the water pump on a 1985 Chevy Cavalier?
To replace the Cavaliers water pump, drain the radiator. Remove the pumps drive belt. Unbolt the pump and take it off ( you might have to take the fan and shroud off to get to the pump.) Install the new pump and put the belt back on. Refill the radiator with antifreeze.
How do you replace water pump in Chevy s10 2000 2.2?
To give yourself some elbow room, remove the fan/clutch assembly along with the fan shroud. Note, the water pump is not behind the fan pulley as you would normally expect. Remove the accessory belt. Remove the water pump pulley. Drain off the radiator coolant into a clean container. Remove the water pump. Install in reverse order.
Where is the Waterpump for a 1993 240sx?
The fan is bolted to the front of the water pump with 4 bolts, once the fan is off the water pump is exposed.
Why would the water pump attached to the cooling fan with a spacer wiggle in a 92 Chevy s-10 automatic?
Your water pump is shot. Replace it before it comes off and ruins your radiator! I hope this helps you. Mark
Where is the timing belt located on a 1995 Chevy truck?
you have to take the fan off the water pump then remove the water pump and you will see the timing belt cover it looks kind of like and oval shape you have to remove that cover and there youll have it A 95 Chevy has a timing chain not belt!
How do you remove the fan from the water pump of a Chevy Blazer?
to remove the fan you need a large crescent wrench and something in witch to hold the surpintine belt puly on the water pump in place then turn the fan nut counter clock wise and it will break free and come off. qyestions email at medicwp@yahoo.com
