you must take the interior door panel loose- after loosening the clips on the front of the panel - try not to break them- also there is a Phillips head screw on the top vinyl of the interior panel by the mirror. I was able to bend the panel back enough carefully after loosening the front clips and taking the screw out- enough to take the nuts off the mirror bolts. My recollection is they were 10mm 1/4 inch drive with deep well worked for me. be careful to not lose the nuts down in the door. I did it myself- 2 people would be handy though.
passender side bell housing
Take off the inside of the door panel the bolts are in tie in side of the door
No
Remove the inside door panel from your 1991 Chevrolet 1500 pickup truck. Remove the wiring harness from the mirror. Remove the driver side mirror retaining bolts. Reverse the process to install the new driver side mirror.
To get to the side mirror switch on a 2002 Dodge Intrepid look on the driver side door. The mirror switch is located just above the window up and down switches.
no
No
On the firewall pass side.
no the 96 steering wheel is different
If you have an electric side mirror you have to remove the door panel then unplug the electrical connector and then remove the screws that hold the mirror.
Assuming you mean step-side pickup truck, yes.
96 dodge ram side rear view mirror will not stay in position